AAC Block Jointing Mortar

Product Details:

AAC Block Jointing Mortar is a premixed, factory-made material that's used to create a strong and durable bond between autoclaved aerated concrete (AAC) blocks.

Surface Preparation

All surfaces should be structurally sound, clean and free of all dirt, oil, grease, concrete sealers or curing compounds. 

Rough or uneven concrete surfaces should be made smooth with Asian Paints SmartCare Multi Purpose Polymer modified mortar to provide a levelled finish. 

Installation may be made on a damp surface. All slabs must be plumb and true to within ¼" (6mm) in 10 ft (3m). 

Do not cover expansion joints with mortar. 

 
Application:

Before placing mortar, ensure the block should be free from dust, dry and surfaces cleaned properly. 

Place the mixed mortar on the block work in thin layers of 3-4mm (or as required by site engineers) using trowel and place the next layer of blocks on the mortar. 

Keep joints between the blocks as required by the site engineers, fix side block by applying mortar on vertical side and fill the joints with the mixed mortar, using a trowel. 

Check the plumb of the wall while laying the blocks to keep the walls perfectly vertical to the plumb.